Manual Adjustable Suspension Seatpost

Adjustable Shock Absorption Seat Post User Manual

Click here to go to product page

**Please note that the bike brand Urban Arrow only allow seatposts that are aproved by the brand**

  • Brand: Studio Vollebak
  • Color: Black
  • Diameter: 31.6 mm
  • Travel: 100 mm adjustable stroke + 20 mm damping stroke
  • Material: Aluminum alloy
  • Lifting Mechanism: Gas spring
  • Shock Absorption: Gas spring + mechanical spring
  • Maximum rider weight: 100 Kg

 

Installation Instructions

  1. Use a 5 mm hex wrench to loosen the clamp. At the same time, loosen the adjustment knob by hand to create enough space to mount the saddle.
  2. Position the saddle rails into the groove of the seat post head. Slightly tighten the adjustment knob and clamp (do not fully lock yet).
  3. Adjust the saddle angle by turning the adjustment knob until it is in the desired position.
  4. Fully tighten the adjustment knob and then lock the clamp.
  5. Recommended torque: 15–18 Nm.
  6. Ensure that the seat post is inserted at least to the minimum insertion (safety) line.

Height Adjustment

  • To raise: Pull the handle upward — the seat post will automatically rise.
  • To lower: While pulling the handle upward, apply downward pressure on the saddle. Release the handle at the desired height.

Suspension Adjustment

Turn the hex bolt to adjust the suspension:

  • Clockwise to increase tension
  • Counterclockwise to decrease tension